Dynamic Balancing, Industrial Balancing & Repair, Industrial Balancing - Melbourne, Australia

Balancing Centrifugal Pump Impellers

Vibration caused by imbalance in rotating machinery, including pumps, is an important engineering problem.

It is generally agreed that balancing the rotating components of a centrifugal pump is critical, especially after a coating or repair, even a minor one. From our experience at Precision Balancing it should be a high priority when a centrifugal pump is being overhauled.

Because excessive vibrations are generally the outcome of a system malfunction reducing rotor vibrations generally increases the service life of the rotating machinery. Increased vibration levels generally indicate a premature failure, which means that the equipment has started to destroy itself. Generally higher amplitude vibration levels are indicative of faults developing in mechanical equipment. It is expected that all pumps will have some vibration due to turbulent liquid flow, pressure pulsations, cavitation’s, or pump wear. The magnitude of this vibration will be amplified if the vibration frequency approaches the resonant frequency of the pump, foundation or piping components.

The sources of vibration in centrifugal pumps can be generally categorised into three types; Mechanical, Hydraulic, and Peripheral causes.

Mechanical causes can include unbalanced rotating components, damaged impellers, non-concentric shafts or sleeves, thermal growth, worn or loose bearings, drive misalignment, erosion and corrosion, damaged or rubbing parts, pipe strain, or inadequate foundations.

Hydraulic causes of vibrations can include internal recirculation, turbulence in the system, air entrapment, water hammer, product vaporisation, or operating the pump at other than the best efficiency point.

Peripheral causes my include the impeller vane running too close to the pump, operating the pump at a critical speed, harmonic vibration from nearby equipment, or temporary seizing of seal faces if you are pumping a non lubricating fluid.

It is critical to reduce vibration in centrifugal pumps because it has a major effect on the performance. Pump reliability is a critical factor for commercial and industrial facilities to reduce their maintenance costs and unscheduled downtime, while increasing the equipment return on investment.

Precision Balancing has been offering in house and on site dynamic balancing and vibration analysis services since 1989 and have the equipment, skills and experience to satisfy your industrial balancing requirements. Precision Balancing strictly adhere to the requirements of the relevant ISO standard, and all jobs are tracked through our system and are issued with a certificate of compliance.

Balancing Centrifugal Pump Impellers

 


Latest News

November 17, 2017
High End Axial Fan Balancing
Precision Balancing have extensive experience in balancing industrial axial fans for high end applications. Like this cast axial impeller for a marine application, we were able to achieve...
Read more...

March 6, 2016
Staff Training and Accreditation
Precision Balancing Melbourne has recently undertaken further staff training and accreditation, coupled with updated procedure documentation and record keeping, which has enabled them to...
Read more...

July 14, 2015
New On Site Balancing Technology
Vibration caused by imbalance in industrial rotating machinery, including pumps, is an important engineering problem. On site balancing is balancing a part while it is in its normal....
Read more...

March 15, 2015
Balancing A Reliable Supply Chain
In any industry it is important to have a reliable supply chain, it is often a critical factor of success in meeting your customers’ expectations. We operate in a globally assimilated world...
Read more...

November 6, 2014
Balancing Centrifugal Pump Impellers
Vibration caused by imbalance in rotating machinery, including pumps, is an important engineering problem. It is generally agreed that balancing the rotating components...
Read more...

August 9, 2014
The Yin and Yang of Precision Balancing
Imbalances within a network do not often result in positive outcomes. Unsurprisingly the same applies to rotating machinery, pumps and fans, where vibration caused by imbalance...
Read more...

April 15, 2014
Continued Enhancement of Onsite Balancing Capabilities
As part of our ongoing development program to the services we offer our customers Precision Balancing has made further investments to their onsite industrial balancing service division...
Read more...

January 10, 2014
Fan Resonance and Balancing
Mechanical components, such as transmission gear and bearings, generate a mechanical loss that reduces the power transferred from the motor shaft to a pump or fan impeller...
Read more...

July 18, 2013
Upgrade Program hits New Gear
As part of their ongoing Industrial Balancing equipment and infrastructure upgrade program Precision Balancing have just ordered a new state of the art balancing machine...
Read more...

June 10, 2013
Long term costs in the Balance!
During difficult financial times the pressure is always on reducing cost wherever possible. Elements of design, engineering and quality are often compromised in order to achieve...
Read more...

May 30, 2013
Is your Pump Reliability in the Balance?
Pump reliability is a critical factor for commercial and industrial facilities to reduce their maintenance costs and unscheduled downtime, while increasing the equipment ...
Read more...



Older News...

On site balancing

At Precision Balancing we offer an On Site Balancing Service, balancing a part while it is in its normal operating position at your facility.
Read more...

Why Balance?
  • Lengthens service life
  • Reduces chances of failure
  • Improves running conditions to maximize return on investment
  • Increases equipment performance, operating quality and economy
  • Increases bearing life and reduces bearing loads
  • Reduced noise and disruptive vibration
  • Increases safety, reduces downtime labour and material costs

Contact

Precision Balancing Pty Ltd
5 Dempster Street
Ferntree Gully (Melbourne) Victoria 3156
ABN 87 847 073 095

Phone: (03) 9758 7189
Fax: (03) 9758 8722

Business hours: Mon-Fri 8:30 → 17:00
Eastern Australian Time (Victoria)